Useful Consumer Review

I bought an HP Officejet 7110 (which is an A3 inkjet printer) to print stuff for screenprinting and the like.  It prints out nicely onto normal paper, but whenever I tried printing onto any type of plastic (transparencies for screenprinting or vinyl for t-shirt transfers) it creates these annoying lighter horizontal lines:

IMG_5511After trying all the different print modes, and calibrating with each of them, I found some settings that lessened the problem, but nothing that could remove the problems totally.

Now, the 7110 is the cheapest A3 printer I could find, so it’s perhaps not surprising that it’s not…  fabulous.  So I got a more expensive printer, the Epson Stylus Photo R3000.  Which is also an A3 inkjet printer.

IMG_5514Look, ma, no lines!

IMG_5510Well, except where there’s supposed to be lines.

But it’s not a perfect printer. The main issue I’ve had with it so far is that you can’t use the front loader unless you’re using really stiff paper, and plastics aren’t very stiff.  So you have to use the back/top loader, which means that it takes up a lot more space than it should have to.

IMG_5513It prints out very nicely, though.  On paper, vinyl and transparencies (it’s down with OHP, even if the manual doesn’t say anything about it) — it looks good on all media I’ve tried it with.  Work well with CUPS under Linux, too, although it’s new enough that I had to install the .deb driver for it manually.

And it has a gazillion paper quality options, and lots if various inks.  Four black inks, for instance: Matte black, shiny black, light black and light light black.  (Yes, it’s called that.)

So that’s not much of a review, except to say: The Hewlett-Packard Officejet 7110 sucks if you want to use it for screenprinting, and the Epson R3000 works great.

 

Couture: Plastics

I’m still still still waiting for the right squeegee (the squeegee shop owners apparently went to France for the summer) for doing screen printing, but I got a shipment of t-shirt blanks.  So I had to make something.

I bought a different make of iron-on transfers — this time for black shirts. Sigel Foil T-Shirt Transfers.  Or something:

IMG_5508These are pretty nice.  You print out onto the transfer “paper”, remove the backing, and then iron the plastic onto the shirt.  The end result is kinda stiff, so it makes the shirt bunch up a bit, but it does look quite nice.

IMG_5507For an iron-on transfer thing.  How’s that for a review.

 

My New Horticulture Blog

The seeds I planted a couple of weeks ago are growing pretty well. Probably because I’ve almost never forgotten to water them. It’s an achievement!

But it’s very windy on my balcony, so I thought it might make sense to shield the plants a bit from the incessant wind. I bought some plexiglas (i.e. plastic) sheets, drilled some holes in them (with a wood drill bit — I was afraid the plexiglas might shatter (it’s quite brittle), but it worked fine), and tied them up with some fishing line:

IMG_5498Looks almost invisible, eh? But they’ll probably grow gross as time passes. We’ll see.

Anyway, I think this is the reason for the windiness:

IMG_5499I’m on the edge of a hill, sort of, so even if there’s the slightest air movement in the hollow down there, I get a blast of wind.

Or something.

Couture: Transparent

While waiting for the screen printing equipment to arrive, I’ve been experimenting a bit more with Inkodye.  Because of reasons.

Here’s an extreme close-up of a shirt exposed with a “normal” over-head projector (OHP) transparency:

IMG_5487The white area with pebbled red spots is supposed to be totally white, but because the OHP transparency is so “pebbly”, there’s tons of tiny white holes where it’s supposed to be totally black.  And the result is pretty bad.

But then I got “digital negative” transparencies.  These are for sale only in photo speciality stores, and are more expensive.  But the result is a lot better:

IMG_5488No pebbling, so no orange spots where it’s supposed to be totally white.  I did screw up the print, anyway, because the shirt bunched up a bit.

IMG_5489

One of these days I’m going to make an Inkodye shirt that looks almost usable.  Although how usable a white t-shirt is…