My old tv machine worked ok, but it was too slow to play the files MakeMKV ripped from BluRay disks.
So I bought a new one from QuietPC. I’ve bought a couple from them before, and they seem to make reliable, fanless machines.
So here are the notes on problems getting the video working under Debian Linux. Sigh.
The motherboard is Gigabyte H87N-WIFI, the VGA is “Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller”, which is a Haswell HD Graphics thing.
First of all, if you have xserver-xorg-video-modesetting installed, get rid of it. For some reason or other, X -configure prefers this generic driver over the Intel driver, which is pretty nonsensical. It’s not accelerated, so you can’t really use it for much of anything.
After getting rid of it, you’ll get the Intel (i915) driver instead, which works OK. Except if you want to watch video. Then you get lots of tearing. There’s a newer “tear free” version of the Intel xorg driver that fixes this problem, but it’s not included in Debian testing, even.
So go to the Intel page and download the “xf86-video-intel – 2.99.906” package. It compiles easily enough (just need to install some -dev packages). Install it by moving the intel_drv.so file after compiling over the one supplied by Debian. It should work fine. (Unless you’re reading this some time after March 2014.)
Hey! Now you can watch video. Except when the i915 driver loads, the HDMI screen turns all grey. For some reason or other, i915 jacks the backlights on the monitor up to max, leaving me with a very, very pale and bright TV.
After googling for hours, I finally found this. So you have to say
xrandr --output HDMI3 --set "Broadcast RGB" "Full"
to get black to be black. “Yay.”
I got an integrated BluRay slot player in the machine, because I thought that would look tidier than the external USB drive. However, MakeMKV says the following when I try to use it: “Drive BD-RE MATSHITA BD-MLT UJ265 1.00 has RPC protection that can not be bypassed. Change drive region or update drive firmware from http://tdb.rpc1.org. Errors likely to follow.” Indeed. And there is no region free firmware for this drive, so I’ll just continue to use my external BluRay drive.
Anybody know of a region-free slot-in slimline BluRay drive?
The Tellstick control unit didn’t work any more, because they’ve removed the “vendor” and “product” options from ftdi_sio. So this doesn’t work any more:
options ftdi_sio vendor=0x1781 product=0x0c31
Instead you have to say
modprobe ftdi_sio echo 1781 0c31 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id
Yeah, that makes sense…
Finally, the machine has tons of USB3 ports, and just two USB2 ports. I thought that would be a plus, but it seems like my tiny USB monitor doesn’t like being plugged in to the USB3 ports. The kernel says “Cannot enable port 3. Maybe the USB cable is bad?” and the monitor drops connection.
Well, maybe the cable really is bad? It’s always the cable’s fault!
(This is where I go to look for a new cable. And I find one, and switches the cable, and everything works perfectly! It’s always the cable!)
Gack.
See? It almost works out of the box. I mean, finding out all this only took me eleven hours…
It’s the year of Linux on the Desktop any… decade… now.